Wallrock Power Adhesive

• Surfaces should be clean, dry, sound and free from loose paint, plaster, dust and mould.
• Drywall and other absorbent surfaces must be sized and completely left to dry.
• Sizing should be completed at least 4 hours before.

Paste The Wall

• Refer to wallpaper manufacturer's label for specific instructions. Ensure wallpaper is suitable for Paste-The-Wall application.
• For best result use a roller to apply Wallrock Power Adhesive generously and evenly to the wall. Ensure coverage of the wall from floor to ceiling is complete.
• A coverage rate of 1Kg per 5m2 (2.2lb per 53ft2) is suitable for most products.
• Paste up to two widths of wallpaper at once to reduce decoration time.
• Apply paper to pasted wall.
• Simply position wallpaper sheet by sliding and smooth into final place under pressure using a squeegee, wallpaper brush or damp sponge.
• Complete hanging and trimming as normal.

• Do not thin or add water to the adhesive.
• Not suitable for hanging borders or overlapping seams on vinyl wallpapers.
• For best results use vinyl to vinyl adhesive for hanging borders, overlapping seams, and for repairs.
• Contains fungicide and biocide to inhibit mould, yeast and bacteria. Keep away from children and animals. Wash hands thoroughly after use.
• Do not empty into drains or watercourses. Waste should be disposed of using authorised disposal routes and sites.

Paste The Paper

• Refer to wallpaper manufacturer's label for specific instructions - eg. soak time etc.
• Protect surrounding areas (floor coverings and furniture etc) from splashes and drips.
• Paste wallpaper generously, ensuring that edges are fully covered with the paste, allow heavyweight papers to soak until supple, (unless Paste-The-Wall products ie. Wallrock).
• A coverage rate of 1Kg per 5m2 (2.2lb per 53ft2) is suitable for most products.
• Ensure edges are stuck to the wall.
• Remove any paste from the face of the wallpaper and surrounding area immediately with a damp cloth or sponge.
• Clean tools and equipment in warm soapy water.

• Do not thin or add water to the adhesive.
• Not suitable for hanging borders or overlapping seams on vinyl wallpapers.
• For best results use vinyl to vinyl adhesive for hanging borders, overlapping seams, and for repairs.
• Contains fungicide and biocide to inhibit mould, yeast and bacteria. Keep away from children and animals. Wash hands thoroughly after use.
• Do not empty into drains or watercourses. Waste should be disposed of using authorised disposal routes and sites.

• Paste on the side of the tub should be wiped into the bulk to avoid drying out.
• Close the lid tightly.
• Avoid extreme temperatures.
• Protect from frost (Do not store below 5°C/41°F).