Wallrock Power Adhesive Instructions
Wallrock Power Adhesive is suitable for hanging all types of wallpapers – no mixing is required. The smooth, easy to use adhesive has excellent wet tack properties and slides easily for perfect hanging and pattern matching whether you choose to Paste-The-Wall** or paste the paper wallcoverings.
** Paste-The-Wall wallpapers are specifically designed and should be identified upon commencement.
Using It To Hang All Types Of Wallpaper
Wallrock Products*, Anaglypta Products*, Standard Wallpapers, Embossed Wallpapers, Paste-The-Wall Wallpapers, Expanded, Heavy-Weight & Luxury Vinyls and Fabric & Glassfibre Wallcoverings.
*not recommended for Wallrock Thermal Liners or Insulators Range, where Wallrock Thermal Liner Adhesive should be used.
Surface Preparation
- Surfaces should be clean, dry, sound and free from loose paint, plaster, dust and mould.
- Drywall and other absorbent surfaces must be sized and completely left to dry.
- Sizing should be completed at least 4 hours before.
Paste Consumption and Coverage
For standard flat backed products a typical paste consumption should be 1Kg per 5m2 (2.2lb per 53ft2), more if the wall is in poor condition. For embossed products or very heavy wallcoverings paste consumption will be up to 100% greate
Storage
- Paste on the side of the tub should be wiped into the bulk to avoid drying out.
- Close the lid tightly.
- Avoid extreme temperatures.
- Protect from frost (Do not store below 5°C/41°F).
